site logo

Nickel Alloy – Inconel 600 , UNS N06600 Introduction

Nickel Alloy – Inconel 600 , UNS N06600 Introduction

Time:2022-03-20 Source:WUXI JIANUO SPECIAL STEEL CO.

Steel grades: Inconel 600 / N06600 / 2.4816/ 1Cr15Ni75Fe8 / NS312 / CY40

Features and Applications.

Features.

* Very good corrosion resistance to reducing, oxidizing and nitriding media.

* Very good resistance to stress corrosion cracking at room temperature and high temperature.

* Very good resistance to dry chlorine and hydrogen chloride gas corrosion.

* High strength at 650°C, good forming and easy welding; in air, maximum service temperature up to 1175°C.

wedding-36 * Evaporation tanks in petrochemical production, machines for the acid and alkali industries, catalytic regenerators.

* Curved neck bottles and components in heat treatment furnaces, especially in carbonized and nitrided gases.

* Nuclear reactor power generation equipment, heat exchangers.

* Resistant to chlorine and fluorine corrosion: production of organic or inorganic chlorides and fluorides.

* Corrosive alkali metal production and use areas, especially in environments where sulfides are used.

* Thermowells in aggressive gases

* Jet engine components, turbojet engine make-up combustion components.

Applicable standards.

ASTM B 163 /B 751/B 775/B 829/ASME SB 163//SB 751/SB 775/SB 829

Chemical composition:

C Si Mn S Cr Ni Mo Fe Cu
0.15 max 0.50

max

1.0

max

0.015

max

14.0~

17.0

72.0

min

8.0~

10.0

6.0~

10.0

0.50

max

Density and coefficient of linear expansion:

Density 8.47 g/cm3
Temperature 21 – 93°C
coefficient of linear expansion 13.3μm/m •°C

Mechanical properties :

Status Tensile Strength

Ksi(Mpa)min

Yield strength (0.2% residual deformation) Ksi(Mpa)min Elongation (%)min
Annealing 80(552) 35(241) 30