site logo

What is the weight density of various material grades of stainless steel sheets?

What is the weight density of various material grades of stainless steel sheets?

Time:2022-03-16 Source:WUXI JIANO SPECIAL STEEL CO.

What is the density of 201 stainless steel plate? The following is introduced by Wuxi JiaNuo Special Steel Co. Stainless steel plate has corresponding acid and alkali resistance, high density, polishing without bubbles, pinholes and other characteristics, is the manufacture of various types of cases, strap bottom cover high quality materials, etc.. It is mainly used to make decorative tubes, industrial tubes, some shallow drawing products. Cano Special Steel provides customers with austenitic, ferritic, austenitic-ferritic (duplex steel) and other series of stainless steel materials or processed semi-finished products.

201/201/301/304/321 stainless steel density is: 7.93g/cm3

316l/309s/310s stainless steel density of: 7.98g/cm3

400 series such as 430, 410, 409 and other stainless steel density is: 7.75g/cm3

5

The density of stainless steel varies by type. The density of stainless steel is generally 7.85 grams per cubic centimeter. Density = weight/volume. Stainless steel is an alloy, it does not have a density that can be precisely stated. If you can know the proportion of its components, according to the calculation can only be derived from the results. According to the main is the chemical composition can be divided into chromium stainless steel, chromium-nickel stainless steel and chromium-manganese-nitrogen stainless steel, etc.. Their densities are also different.

Generally speaking, the density of stainless steel is 7.93×1000Kg/m3, there are slight differences between different materials S30408 7.93×1000Kg/m3, S30403 7.90×1000Kg/m3, S31008 7.98×1000Kg/m3.

Tensile strength:520MPa

Yield strength:275MPa

Elongation:55to60%

Modulus of elasticity:29,000,000psi converted to:203,000MPa

Hardness requirement(Brinell hardness)HRB<183N/mm2(MPa).

Density:.280lbs/cubicinch(density 7.93g/cm3)

China mainly has the following 200 series of steel grades: J1, J3, J4, 201, 202. after the emergence of lower control of the nickel composition of 200 and other steel grades, for 201C, is here late in the development of individual steel mills in China 201 derivative steel grades, 201 national standard grades are: the old grade 1Cr17Mn6Ni5N, the new grade: 12Cr17Mn6Ni5N201C on the basis of 201 continues to reduce the composition of nickel and increase the composition of manganese.

Stainless steel plate density table.

Brand Density*(1000kg/m3) Brand Density*(1000kg/m3)
00Cr30Mo2 7.64 00Cr19Ni13Mo3 7.98
00Cr27Mo 7.67 0Cr19Ni12Mo3 7.98
1Cr17Mo 7.70 0Cr25Ni20 7.98
1Cr15 7.70 0Cr18Ni12Mo2Cu2 7.98
3Cr16 7.70 00Cr18Ni14Mo2Cu2 7.98
00Cr27Mo 7.67 0Cr19Ni12Mo3 7.98
1Cr17 7.70 00Cr19Ni13Mo3 7.98
00Cr17 7.70 0Cr18Ni11Nb 7.98
7Cr17 7.70 0Cr17Ni12Mo2N 7.98
1Cr12 7.76 00Cr17Ni14Mo2 7.98
1Cr13 7.76 0Cr17Ni12Mo2N 7.98
0Cr13Ai 7.75 00Cr17Ni13Mo2N 7.98
00Cr12 7.76 0Cr18Ni16Mo5 8.00
0Cr13Al 7.75 1Cr17Ni7 7.93
2Cr13 7.75 0Cr23Ni13 7.93
3Cr13 7.75 1Cr17Ni8 7.93
0Cr18Ni13Si4 7.75 1Cr18Ni9 7.93
00Cr18Mo2 7.75 1Cr18Ni9Si3 7.93
0Cr26Ni5Mo2 7.80 0Cr19Ni9 7.93
1Cr17Mn6Ni5N 7.93 00Cr19Ni11 7.93
00Cr18Ni9S13 7.93 0Cr19Ni9N 7.93
1Cr17Mn6Ni6N 7.93 0Cr18Ni11Ti 7.93
1Cr18nNi8Ni5N 7.93 0Cr17Ni17Al 7.93